The Sea Eagle EZLite10 is built around one idea: make a capable solo kayak light enough that nothing stops you going out. At 25 lbs it inflates in under three minutes, carries easily to the water, and packs into a bag afterwards. All-woven drop-stitch construction and a rigid V-bottom floor keep the performance closer to a hard-shell than the weight suggests, and the Pro Carbon package adds a carbon-fibre paddle, tall back seat, pump, repair kit, and carry bag.
At 25 lbs the hull is light enough for most paddlers to carry solo from the car to the launch. It is easy to set up, easy to pack, and easy to store between trips.
The newer woven drop-stitch material is both lighter and stronger than earlier builds. Chambers inflate to 10 psi across the floor and sides for a stiff, responsive hull.
The attached woven drop-stitch floor forms a V-bottom profile with non-slip EVA foam padding on top. That shape improves tracking and handling, with speeds running 2 to 6 mph.
The adjustable footrest sets you at a low centre of gravity for confident paddling. Lever-action rods let you pull the rods and pedals out quickly for compact storage.
A rear cockpit drain opens to clear water and closes when you want to stay dry. Extra rear storage sits under a spray skirt, with dual daisy chain strips for tying down gear.
This package pairs the tall back seat with an AB50 8 ft carbon-fibre paddle, which noticeably reduces arm fatigue over a long day. A pump, repair kit, and kayak bag are included.
| Brand | Sea Eagle |
|---|---|
| Model | EZLite10, Pro Carbon Package |
| Person capacity | 1 |
| Load capacity | 1 person or 325 lbs |
| Hull weight | 25 lbs |
| Length | 10 ft |
| Width | 2 ft 8 in |
| Interior | 78" x 18" |
| Deflated size | 32" x 17" x 9" |
| Inflation time | Under 3 minutes |
| Air chambers | 3 (port, starboard, floor) |
| Air valves | 3 recessed one-way |
| Floor | Attached woven drop-stitch floor with non-slip EVA foam padding |
| Floor inflation pressure | Up to 10 psi |
| Side chamber pressure | Up to 10 psi |
| Tube diameter | 4" thick x 11" high |
| Material | 1000 denier reinforced PVC |
| Seam | Welded with quadruple overlapped glued finish |
| Whitewater rating | Suitable up to Class II |
| Speed estimate | 2-6 mph |
| Stern motor capacity | Bixpy K-1 motor with 33 lbs of thrust |
| In the box | Kayak, TBS tall back seat, AB50 8 ft carbon-fibre paddle, FlexBrace2 footrest, pump, repair kit, kayak bag |
| SKU | EZLITE10K_PC |
The hull weighs 25 lbs, which makes it one of the lightest packable solo kayaks on the market and easy for most paddlers to carry alone.
Under 3 minutes to inflate with the included pump. Bring the floor and side chambers up to 10 psi and check with a gauge before launching.
The kayak, the TBS tall back seat, an AB50 8 ft carbon-fibre paddle, the FlexBrace2 adjustable footrest, a pump, a repair kit, and a kayak bag.
One person or 325 lbs in total, covering the paddler and any gear on board.
The hull uses 1000 denier reinforced PVC with welded, quadruple-overlapped glued seams. The all-woven drop-stitch material is both lighter and stronger than the earlier construction.
It paddles easily up to about 5 mph and can reach 6 mph, with typical speeds in the 2 to 6 mph range depending on conditions.
It is rated as suitable up to Class II. Whether you should run those conditions depends on your own training and experience, and proper safety gear is essential.
Roughly 32" x 17" x 9" deflated, so it fits in a cupboard or a car boot alongside your other gear.
A stern-mounted Bixpy K-1 motor with 33 lbs of thrust is supported. Check local rules covering motorised craft before use.
A rear cockpit drain opens to let water out and closes again when you want to keep the cockpit dry.
A kayak you can carry one-handed is a kayak you actually use. If that is what has been keeping you off the water, the EZLite10 Pro Carbon package arrives with everything you need for the first trip. Add it to your cart when you are ready.
!