The Sea Eagle 385ft FastTrack gives you the tracking and speed of a rigid touring kayak in a boat that packs into a bag. A high-pressure V-bottom drop-stitch floor and the NeedleKnife keel hold your line through the water, three independent air chambers add a safety margin, and at 31 lbs the hull is far lighter than a comparable hard-shell. The Pro Carbon package adds a set of upgraded carbon-fibre paddles.
The attached 4" woven drop-stitch floor inflates to 10 psi for a rigid, V-shaped hull profile. That shape cuts through water rather than sitting flat on it, which improves both tracking and paddling efficiency.
Combined with the sleek touring shape, the NeedleKnife keel helps the kayak hold a straight line without constant corrective strokes. Estimated speeds run 2 to 6 mph depending on conditions and paddler.
At 31 lbs the hull is a fraction of the weight of many rigid kayaks, which commonly run 65 to 70 lbs. Grab handles at the front, rear, and centre sides make carrying and launching straightforward.
Port, floor, and starboard chambers are independent, each with a recessed one-way valve. The 1000 denier woven reinforced PVC uses welded seams with a quadruple-overlapped glued finish.
Front and rear spray skirts shed water and create covered storage underneath. Adjustable elastic rope lacing on top holds dry bags and gear you want within reach.
A non-slip EVA foam pad runs the length of the interior for secure footing. It also adds comfort underfoot across a long day of paddling.
| Brand | Sea Eagle |
|---|---|
| Model | 385ft FastTrack V-Bottom, Pro Carbon Package |
| Person capacity | 2 |
| Load capacity | 2 persons or 635 lbs |
| Hull weight | 31 lbs |
| Length | 12 ft 8 in |
| Width | 3 ft |
| Interior | 11'9" x 18" |
| Deflated size | 25" x 18" x 8" |
| Inflation time | About 7 minutes |
| Air chambers | 3 (port, floor, starboard) |
| Air valves | 3 recessed one-way |
| Floor | Built-in 4" drop-stitch floor |
| Floor inflation pressure | Up to 10 psi |
| Side chamber pressure | Up to 3.5 psi |
| Tube diameter | 9.5" |
| Material | 1000 denier woven reinforced PVC |
| Seam | Welded with quadruple overlapped glued finish |
| Whitewater rating | Suitable up to Class III |
| Speed estimate | 2-6 mph |
| Stern motor capacity | 34 lbs thrust electric, max engine weight 15 lbs |
| Package | Pro Carbon: Pro Package contents plus upgraded carbon-fibre paddles |
| SKU | 385FTK_PC |
Two paddlers, with a total load capacity of 635 lbs covering people and gear.
The high-pressure V-bottom drop-stitch floor and NeedleKnife keel give it a rigid hull profile, so it tracks and paddles closer to a hard-shell touring kayak than a typical flat-floored inflatable.
It contains everything in the Pro Package, with the standard paddles upgraded to a set of top-end carbon-fibre paddles.
About 7 minutes to inflate. The floor goes to 10 psi and the side chambers to 3.5 psi, so use a pump with a gauge.
The kayak is rated as suitable up to Class III rapids. Whether you should run those conditions depends on your own training and experience, and appropriate safety gear is essential.
Deflated it measures roughly 25" x 18" x 8", so it stores in a cupboard and travels in a car boot.
31 lbs, compared with the 65 to 70 lbs typical of many rigid kayaks of similar length.
A stern-mounted electric motor up to 34 lbs thrust is supported, with a maximum engine weight of 15 lbs. Check local rules covering motorised craft before use.
1000 denier woven reinforced PVC, with welded seams finished in a quadruple-overlapped glued construction.
If you want the tracking and speed of a touring kayak without giving up a cupboard to store it, the 385ft FastTrack is built around exactly that compromise, and the Pro Carbon package puts better paddles in your hands from day one. Add it to your cart when you are ready.
!